Fiberglass Pool vs Gunite for Killeen Yards

Short version: a fiberglass pool is faster to install, easier to maintain, and gentler on your chemical budget — but you're locked into a manufactured shape and size. Gunite is fully custom and lasts longer, but it costs a resurface every decade or so and takes two to three months to build. Pick fiberglass for speed and low fuss, gunite for a one-of-a-kind backyard. Neither one is "the winner," despite what every pool builder with a favorite will tell you.

Here's the part nobody says out loud at the showroom: most builders push whichever pool they're set up to sell. The fiberglass guy swears concrete is a maintenance trap; the gunite guy swears fiberglass is a glorified bathtub. Both are half right. Let's break it down the way we'd explain it standing in your Killeen backyard, with a tape measure and zero commission on the line.

The 30-second comparison

	Fiberglass	Gunite (concrete)
Upfront cost	Mid-$40k–$85k installed	Mid-$40k–$70k+ installed
Install time	3–6 weeks	8–12 weeks
Shapes & sizes	Preset molds (max ~16 ft wide)	Any shape, any size
Surface	Smooth, non-porous	Rougher plaster
Maintenance	Low (fewer chemicals)	Higher (brushing, chemicals)
Big recurring cost	Gel-coat refinish ~25–30 yrs	Replaster every 10–15 yrs
Shell lifespan	25–30 yrs	50+ yrs (with resurfaces)
Salt system	Loves it	Fine, but salt is rough on plaster

If your eyes glazed over, here's the one-liner: fiberglass is the "get me swimming with less hassle" pool; gunite is the "build me exactly what I pictured" pool.

Cost: closer than you'd think

Everyone leads with price, and everyone gets the answer wrong. The material isn't what moves the number most — your site does.

A fiberglass pool in Killeen typically runs the mid-$40,000s to about $85,000 installed. The shell shows up on a truck as one finished piece, which saves labor, but that same truck needs room to swing a crane into your yard. Tight access, a fence to remove, a slope to deal with — that's where the price climbs.

A gunite pool usually lands in the mid-$40,000s into the $70,000s and up, and the sky's the limit once you add spas, tanning ledges, and rock features. It's built in place, so access matters less, but the labor is much higher.

On a basic build, the two are often within a few thousand dollars of each other. Where they split is over ten years. Fiberglass costs almost nothing to maintain and won't need refinishing for decades. Gunite needs a resurfacing every 10 to 15 years — figure $5,000 to $12,000 each time — to keep the plaster smooth and sealed. So gunite's true cost is the sticker plus a resurface or two down the road.

Install time: weeks vs. a whole summer

This is the one people underestimate. A fiberglass shell drops in a day or two, and the full a new pool or a full remodel — excavation, set, plumbing, decking, backfill — usually wraps in 3 to 6 weeks. You can order a pool in spring and swim by early summer.

Gunite is a build, not a delivery. Excavate, tie steel, spray the concrete, let it cure, tile, plaster, deck — it's 8 to 12 weeks of a construction site where your lawn used to be. Start in April and you might be doing cannonballs by July. Start in June and you're admiring it in October.

If you've ever lived through a backyard project, you know the real cost of "8 to 12 weeks" isn't just time — it's the mud, the fencing, and the extension cord running through your kitchen window.

Customization: preset shell vs. blank canvas

Fiberglass comes in molds. That means a curated menu of shapes, and a hard ceiling around 16 feet wide (that's the widest a shell can travel down a highway without a police escort). The good news: those molds now come with built-in benches, steps, and tanning ledges, so "preset" isn't as limiting as it sounds.

Gunite is a blank canvas. Any shape, any depth, any size, wrapped around a tree if you want. Vanishing edge, beach entry, an attached spa that spills into the pool — if you can draw it, gunite can be it. That freedom is exactly why high-end custom backyards and any serious pool remodeling job lean gunite.

Maintenance and lifespan: the honest trade

Fiberglass has a smooth, non-porous gel coat. Algae can barely get a grip, so you brush less and dose fewer chemicals — real savings over a long Bell and Coryell counties swim season. The shell itself lasts 25 to 30 years before that gel coat wants refinishing.

Gunite's plaster is porous and a touch rough, which algae treats as beachfront property. You'll brush more and run your chemistry tighter. But the shell is nearly bulletproof — 50-plus years is normal — as long as you budget for that periodic replaster.

The part the builders skip: match the pool to your plans, not their pitch

Here's where we'll actually take a side, because "it depends" is a cop-out.

Choose fiberglass if a standard shape fits your yard and you want low upkeep — especially if you run a saltwater system. Salt is easy on a fiberglass gel coat and slowly chews at gunite plaster, which is one more reason saltwater pools and fiberglass are a natural pair. If you're not planning to grow old in this house, fiberglass also spares the next owner a looming replaster bill.

Choose gunite if you want a shape or size fiberglass can't mold, or you're staying put for the long haul. Over 30-plus years in the same backyard, a gunite shell's longer life and full customization earn their keep — even with the resurfaces.

The two things that should decide this — how long you'll own the home, and whether you run salt — are the two things a commissioned salesperson almost never asks about. That's the tell.

So which one for a Killeen backyard?

For the average Killeen homeowner who wants to swim this season and stop thinking about it: fiberglass, if a stock shape fits your space. The fast install and low maintenance are worth a lot in a long, hot TX summer.

For anyone building a showpiece — custom shape, big footprint, spa, the works — gunite, full stop. Fiberglass simply can't mold what you're picturing.

And if your yard has tight access, a high water table, or expansive soil, don't guess. Those site conditions can flip the math and even rule one option out. That's a look-at-it-in-person call, not a Google call.

The bottom line

Fiberglass vs gunite isn't good vs bad. It's fast-and-low-fuss vs fully-custom-and-long-lived. Match the pool to your yard, your salt setup, and how long you're staying — not to whichever one the builder happens to stock.

If you'd rather have someone measure your yard and tell you straight which one actually fits, Killeen Pool Builders builds and services both across Killeen and Bell and Coryell counties — from a new pool or a full remodel to resurfacing and full pool remodeling. Free quote, no pressure, no favorite: call (877) 795-1749.